Dynisco DYN-X-10M-6/18 Melt Pressure Transducer, 0 to 10,000 psi, 6 x 18"
SKU: DYN-X-10M-6/18
Availability: 2 to 3 Weeks Dynisco DYN-X-10M-6/18 Offers The melt pressure transducer is easy to calibrate and has superior abrasion resistance. Features Value priced Accuracy better than +/- 1.0% Dymax coated stainless steel wetted parts Proven sensor design Internal 80% shunt calibration Repeatable pressure measurements Good stability and repeatability Applications Pressure measurement Dynisco DYN-X-10M-6/18 Specifications Specifications Pre
Availability: 2 to 3 Weeks
Dynisco DYN-X-10M-6/18 Offers
The melt pressure transducer is easy to calibrate and has superior abrasion resistance.
Features
- Value priced
- Accuracy better than +/- 1.0%
- Dymax coated stainless steel wetted parts
- Proven sensor design
- Internal 80% shunt calibration
- Repeatable pressure measurements
- Good stability and repeatability
Applications
- Pressure measurement
Dynisco DYN-X-10M-6/18 Specifications
Specifications
| Pressure Range | 1,000 to 10,000 psi |
| Snout Length | 6" (15 cm) |
| Stem Length | 18" (46 cm) Flex |
| Output | 3.33 mV/V +/- 2.0% |
| Input Voltage | 10 Vdc recommended, 12 Vdc maximum |
| Combined Error | +/- 1.0% FSO, (Including Linearity, Repeatability & Hysteresis) |
| Repeatability | +/- 0.2%FSO |
| Configuration | Four-arm bonded foil Wheatstone bridge strain gage |
| Bridge Resistance | Input & Output: 345 Ohms minimum |
| Over Pressure | 2 X FSO |
| Zero Balance | +/- 10% FSO |
| Internal Shunt Calibration (R-Cal) | 80% FSO +/- 1% |
| Insulation Resistance | 1000 megohms @ 50 Vdc |
| Max Diaphragm Temperature | 750°F (400°C) |
| Electronics Operating Temperature | 250°F (121°C) |
What's included with the Dynisco DYN-X-10M-6/18
- Dynisco DYN-X-10M-6/18 Melt Pressure Transducer, 0 to 10,000 psi, 6 x 18"
Dynisco DYN-X-10M-6/18 Melt Pressure Transducer, 0 to 10,000 psi, 6 x 18". Great savings PLUS Free Shipping when you order today on EquipTestPro.com.
Related Products
