Dynisco PT460E-10M-6 Melt Pressure Transducer, 0 to 10,000 psi, rigid stem
SKU: PT460E-10M-6
Availability: 2 to 3 Weeks Dynisco PT460E-10M-6 Offers The melt pressure transducer has an accuracy better than ±0.5%. Features DyMax coated stainless steel wetted parts Proven sensor design Internal 80% shunt calibration Applications Pressure measurement Dynisco PT460E-10M-6 Specifications Specifications Pressure Range 0 to 10,000 psi Transducer Configuration Rigid stem, no flexible capillary Snout Length 6″ (15 cm) Combined Error ±0.5% FSO,
Availability: 2 to 3 Weeks
Dynisco PT460E-10M-6 Offers
The melt pressure transducer has an accuracy better than ±0.5%.
Features
- DyMax coated stainless steel wetted parts
- Proven sensor design
- Internal 80% shunt calibration
Applications
- Pressure measurement
Dynisco PT460E-10M-6 Specifications
Specifications
| Pressure Range | 0 to 10,000 psi |
| Transducer Configuration | Rigid stem, no flexible capillary |
| Snout Length | 6" (15 cm) |
| Combined Error | ±0.5% FSO, (Including Linearity, Repeatability & Hysteresis) |
| Repeatability | ±0.2% FSO |
| Configuration | Four active arm bonded Wheatstone bridge strain gage |
| Bridge Resistance | Input: 345 Ohms minimum; Output: 350 Ohms ±10% |
| Output | 3.33 mV/V ±2.0% |
| Zero Balance | ±10% full scale |
| Input Voltage | 10 Vdc recommended, 12 Vdc maximum |
| Internal Shunt Calibration (R-Cal) | 80% FSO ±1.0% |
| Insulation Resistance | 1,000 megohms at 50 Vdc |
| Maximum Diaphragm Temperature | 750°F (400°C) |
| Standard Wetted Parts | Dymax coated 15-5 PH SST |
What's included with the Dynisco PT460E-10M-6
- Dynisco PT460E-10M-6 Melt Pressure Transducer, 0 to 10,000 psi, rigid stem
Dynisco PT460E-10M-6 Melt Pressure Transducer, 0 to 10,000 psi, rigid stem. Great savings PLUS Free Shipping when you buy now from EquipTestPro.com.
Related Products
